K-TVS™ Medium Duty Vertical Sump Pump

Cost-effective and versatile, designed for submergence of the ‘wet end’ in pits or sumps and capable of handling a range of applications. This robust and functional design has been engineered for continuous and/or intermittent pumping of slurries, offering reliable performance and excellent wear endurance.

The cantilever design minimises the risk of flow blockage during performance on site and features non-submerged roller bearings or seals. The design allows for simple installation on site and features an unlined casing design, with a minimal amount of parts for swift and easy overhaul.

Important features of the K-TVS™ Sump pumps are, the ‘twin volute discharge’ incorporated into the casing to reduce shaft deflection and radial load to the impeller. The ease of disassembly due to the use of cotters and victaulic clamps allow minimal downtime during wear component replacement. The K-TVS™ pumps are available in a variety of different setting lengths to reach the depths required for the duty.


  • Standard lengths: 990mm, 1370mm, 1830mm, 2200mm, 2740mm, 3050mm, 3450mm and 4000mm (lenghts above 1830mm include cutless elastomers intermediate bearing/s)
  • Size: 75 mm (3”)
  • Flows to: 120 m³/h (528 US gpm)
  • Heads to: 30 m (100 ft)


  • Drainage
  • Magnetite mixing
  • Spillage
  • Sump drainage
  • Floor washing
  • Dewatering
  • Acid & alkaline duties


  • Casing supported by discharge pipes for reduced radial loading on impeller
  • For ease of maintenance, casing parts fastened by two quick-release cotters and salvic joints
  • Casing supported by discharge pipes for reduced radial loading on impeller
  • The twin discharge features an adjustable single bolt V-drive and impeller adaptable for range of slurry transport duties
  • Grease lubricated and sealed with labyrinth type seals
  • Open five-vane top suction impeller design enables the handling of large solids
  • Ability to run dry
  • Special grease retainer on non drive end, provides improved containment of grease in the non drive end bearing cavity
  • Various materials to suit application 

K-TVS™ Series Coverage Chart



  • Icon.png (3)

    Product Data Sheets

    K-TVS™ Medium Duty Vertical Sump Pump

  • Icon.png


    KETO Company Overview Brochure

Back to top